13
OVERFLOW DEVICE
In order to avoid serious damages to the
suction motor, the machine is equipped with a
float that intervenes when the recovery tank is
full, closing the suction hose and stopping the
suction.
1. When this happens, it is necessary to empty
the recovery tank.
2. Hold the drain hose placed in the front part
of the machine.
3. Take off the drain plug acting upon its lever
and empty the recovery tank into appropriate
containers, according to the standard norms
for the liquid disposal.
EMPTYING DETERGENT SOLUTION
To empty the detergent solution remained in
the solution tank:
1. Bring the machine to an appropriate place
for tanks draining.
2. Unscrew the solution tank cap (1).
3. Unscrew the exhaust plug (2).
FORWARD MOVEMENT
The traction of these machines is given
by the brush that, working on an inclined
axle, transmits to the machine the forward
movement.
STOP
Releasing the lever of the movement, brush
rotation will end, stopping the machine
movement.
When moving the machine backwards, make
sure that the squeegee is lifted.
To Next Page
Loading...
Need help?
General