42
User Login This is the custom login for the “user” account. Users must keep this login a
secret to avoid unauthorized access. If this device is bind to a service provider usually this login will
available to allow users to perform basic administrative functions to the device.
User Password This is the password for the “user” account. Users must keep this password
a secret to avoid unauthorized access.
IP Via The selection allows DHCP or Static IP assignment to the Ethernet
interface of the device. If DHCP is selected the device will acquire its IP address dynamically.
Static IP This is the static IP Address of the device. This IP address will be ignored
in the DHCP Server selection is enabled. The Static IP address will still be saved in the memory.
NetMask This is the Network Mask for the Static IP address. The default value is:
255.255.255.0. This network mask will be ignored in the DHCP Server selection is enabled.
Uplink Gateway This is the IP address of the Uplink Gateway required to connect the device
to the outside network (Internet). Usually this is the IP address of the Home router or the Business NAT
Firewall. This IP address will be ignored in the DHCP Server selection is enabled.
DNS Server This is the IP address of the DNS server. The DNS IP address will be
ignored in the DHCP Server selection is enabled.
NTP Server This is the IP address or Domain Name of the NTP (Network Time
Protocol) server. The server will be used to synchronize the device’s time.
IPv6 Status Check this to enable/disable IPv6 support
IPv6 Via This is the default interface for IPv6
Static IPv6 IP Sets the static IPv6 address
IPv6 Uplink Gateway Sets the IP of the Uplink Gateway
IPv6 DNS Server Sets the IP of the DNS server in the IPv6 network
Service Management Section
Start URL This is the URL that is first displayed upon GIU startup. The URL allows
modification of the complete STB GIU by providing custom HTML/XML and Java Script interface. The
default URL is: http://www.sysmaster.com/demo/M55/M70/index.html
HTTP Server Port This is the port via which the device will be accessible when using an
HTTP protocol.
Use Remote Phone Book* This allows sharing of one large Phone book among multiple subscribers.
To Next Page
Loading...
Need help?
General
