Toro 22305A User Manual

Operation
21
• To turn, move the lever located on the side you
want to turn toward the neutral position while
keeping the other lever engaged.
• To slow or stop, move the traction control levers
to neutral.
Note: The farther you move the traction
control levers in either direction, the
faster the traction unit will move in
that direction.
Stopping the T raction Unit
To stop the traction unit, move the traction control
levers to neutral and the throttle lever to slow (turtle),
lower loader arms to the ground, and turn the ignition
key off to stop the engine. Remove the key.
POTENTIAL HAZARD
• Someone could move or attempt to operate
the traction unit while it is unattended.
WHAT CAN HAPPEN
• Children or bystanders may be injured if
they use the traction unit.
HOW TO AV
OID THE HAZARD
• Always r emove the ignition key when
leaving the traction unit, even if just for a
few seconds.
Moving a Non-functioning
T raction Unit
IMPORTANT: Never tow or pull the traction
unit. Rotating the wheels manually will cause
damage to the hydraulic wheel motors.
1. Stop the engine.
2. Lift the traction unit off the ground, using the
two lift points (Fig. 11), and move it onto a
trailer.
m–4389
1
1
Figure 1 1
1. Lift points

Toro 22305A Specifications

General

Brand	Toro
Model	22305A
Category	Compact Loader
Language	English