WARNING
Batteryterminalsormetaltoolscould
shortagainstmetalcomponentscausing
sparks.Sparkscancausethebattery
gassestoexplode,resultinginpersonal
injury.
•Whenremovingorinstallingthe
battery,donotallowthebattery
terminalstotouchanymetalpartsof
themachine.
•Donotallowmetaltoolstoshort
betweenthebatteryterminalsand
metalpartsofthemachine.
WARNING
Incorrectbatterycableroutingcould
damagethemachineandcablescausing
sparks.Sparkscancausethebattery
gassestoexplode,resultinginpersonal
injury.
•Alwaysdisconnectthenegative
(black)batterycablebefore
disconnectingthepositive(red)
cable.
•Alwaysconnectthepositive(red)
batterycablebeforeconnectingthe
negative(black)cable.
3.CoatbothbatteryconnectionswithGrafo112X
(skin-over)grease,ToroPartNo.505-47,
petroleumjelly,orlightgreasetoprevent
corrosion.
4.Slidetherubberbootoverthepositiveterminal.
5.Closethebatterycover.
LocatingtheFuses
Thetraction-unitfusesarelocatedunderthe
power-centercover(Figure87,Figure88,andFigure
89).
Removethe2screwssecuringthepower-center
covertotheframeandremovethecover(Figure87).
g020440
Figure87
1.Power-centercover
2.Screws
g020439
Figure88
1.Fuses
decal121-1599
Figure89
Thecabfusesarelocatedinthefuseboxinthecab
headliner(Figure90andFigure91).
Note:Cabmodelonly
65