necting
to
optional
equipment (Continued)/
Power
source
[ Connecting
to
a
PC
(Personal Computer)
Before you connect this TV/DVD to your
PC,
change the adjustment of your PC's Resolution and Refresh rate (60 Hz).
Connect one end of a (male to male) VGA cable
to
the video card of the computer and the other end to the VGA connector
PC
MONITOR on the rear of the TV/DVD. Attach
the
connectors firmly with the screws
on
the
plug.
In
case of a Multimedia computer,
connect the audio cord to the audio output of your Multimedia computer and to the AUDIO connector of the
PC
AUDIO
IN
jack of
the TV/DVD.
Select "PC"
by
pressing INPUT repeatedly.
Switch on the computer. The TV/DVD can operate as the computer monitor
Back
side
To
PC
AUDIO
IN
jack
PC
MONITOR
PC
AUDIO
HOMI
~
......
.,.~
...
Refresh rate
60Hz
70Hz
60Hz
60Hz
60Hz
60Hz
60Hz
Monitor
Display
modes
MODE Resolution
VGA 640x480
VGA 720x400
SVGA 800x600
XGA 1024x768
WXGA 1280x768
WXGA 1280x720
WXGA 1360x768
Ipcl
i i
Audio cord (not supplied)
To
PC
MONITOR
IN
VGA cable (not supplied) To
return
to
normal
mode
Note: Press INPUT again.
o The on-screen displays will have a different appearance
in
PC
mode than
in
TV mode.
o
If
there
is
no video signal from the
PC
when the unit
is
in
PC
mode, "No signal" will appear
on
the TV/DVD-screen.
[ Power source
To
use
AC
power
source
1.
Connect the
AC
cord plug into this TV/DVD's
AC
INPUT jack.
2.
Connect the
AC
cord into an
AC
outlet.
Illustration of
19LVSOS
ACOutiet
Wider Hole
and Blade
$0
AC
120V,
60Hz
=~==
Note:
o Never connect the AC line cord plug to other than the specified voltage (120V 60Hz). Use the attached power cord only.
o
If
the polarized
AC
cord does not fit into a non-polarized
AC
outlet, do not attempt to file or cut the blade.
It
is the user's
responsibility to have an electrician replace the obsolete outlet.
o
If
you cause a static discharge when touching the unit and the unit fails to function, simply unplug the unit from the
AC
outlet
and plug it back in. The unit should return
to
normal operation.
o
If
the
AC
cord plug is plugged
in
for the first time, wait for approx. 5 seconds before pressing POWER.
120
To Next Page
Loading...
Need help?
General
