Connections
16
Optional equipment connections
You can enjoy VCR, camcorder or TV games with connection to an external input.
Important: Read the optional equipment’s owner's manual for related connection
instructions and reminders before connecting the device to your TV/DVD.
Using the audio/video inputs
0-7
INPUT
GAME
Press INPUT to view a signal from another device connected to your TV/DVD, such as a VCR player. You can select TV,
Video (Video 1, 2), ColorStream HD, HDMI (HDMI 1, 2), or PC depending on which input jacks you used to connect your
devices. When the built-in disc player is used, select “DVD”.
Press INPUT on the remote control to display the current signal source. To change the input source, press INPUT again
or press the Number buttons (0-5 for the 19- and 22-inch models, 0-7 for the 26-inch model).
Optional equipment connection reminders
• All input terminals are located on the rear side of the TV.
• When you connect an equipment to your TV, be sure to turn off the power and unplug the equipment from the wall
outlet before making any connections.
• Placing the TV near a tuner or radio can distort the radio broadcast sound. If this is the case, move the unit away from
the tuner and radio.
• The arrow direction in the succeeding figures indicates the signal flow.
Connecting to a VCR
Connect the VCR to the TV/DVD as shown. Select “Video” by pressing INPUT repeatedly.
To Audio/Video OUT
Audio/Video cable (not supplied)
Audio/Video cable (not supplied)Audio/Video cable (not supplied)
To Audio/Video OUT
To Next Page
Loading...
Need help?
General
