Toshiba 40HL933B User Manual

46
English
Base Colour Adjustment
The Base Colour Adjustment feature allows
the adjustment of individual colours to suit per-
sonal preference. This can be useful when using
an external source. It only can be adjusted when
3D Colour Management is set to On.
In the PICTURE
to select Base Colour Adjustment and
press to enter the submenu.

to adjust and press .
Base Colour Adjustment
BrightnessHue Saturation
Red
Green
Blue
Yellow
Magenta
Cyan
Reset
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
OK
Edit
OK
Back
RETURN
Hue, Saturation
or Brightness.
Base Colour Adjustment
BrightnessHue Saturation
0
Red

required.
NOTE: In the PC Input mode, this function is
not available.
Digital Noise Reduction
DNR (Digital Noise Reduction) enables you
to “soften” the screen representation of a weak
signal to reduce the noise effect.
In the PICTURE
select DNR.
Off, Low, Mid-
dle or High.
NOTE: This function is not available for HDMI
input.
MPEG NR – Noise Reduction
When watching a DVD, the compression may
cause some words or picture elements to
become distorted or pixelated.
Using the MPEG NR feature reduces this ef-
fect by smoothing out the edges.
In the PICTURE
select MPEG NR.
Off, Low, Mid-
dle or High.

Toshiba 40HL933B Specifications

General

Brand	Toshiba
Model	40HL933B
Category	TV
Language	English