Saving new preference
You can save the PICTURE qualities (contrast, brightness, color, tint,
and sharpness) you adjusted in the picture preference mode.
To save your new preferences:
1. Press MENU, and then press • or • until the PICTURE menu
appears.
2. Press • or • to highlight SAVE NEW PREFERENCE.
3. Press • or •. When complete, the menu displays "DONE".
®@®®@®
PICTURE ANTENNA
MODE PREFERENCE
FLESH TONE OFF
DNR OFF
CINEMA MODE VIDEO
COLOR
TEMPERATURE MEDIUM
Youcan choose your saved preferences by sdecting PREFERENCE (see
"Selecting the picture mode" on page 41).
Using the flesh tone feature
This feature displays natural flesh tones by correcting the tint.
To turn on the flesh tone feature:
1. Press MENU, and then press • or • until the PICTURE menu
appears.
2. Press • or • to highlight FLESH TONE.
3. Press • or • to highlight ON.
®@®®@®
PICTURE ANTENNA
MODE PREFERENCE
CINEMA MODE VIDEO
COLOR
TEMPERATURE MEDIUM
CONVERGENCE
SAVE NEW PREFERENCE
Using the Digital Noise Reduction {DNR) feature
This feature allows you to reduce visible interference in your TV
picture. This is useful when receiving a broadcast with a weak signal
or playing back a video cassette or disc damaged by repeated use.
To turn on the DNR feature:
1. Press MENU, and then press • or • until the PICTURE menu
appears.
2. Press • or • to highlight DNR.
3. Press • or • to highlight AUTO.
®@®®@®
O PICTURE ANTENNA
MODE PREFERENCE
COLOR
TEMPERATURE MEDIUM
CONVERGENCE
SAVE NEW PREFERENCE
To turn off the DNR feature:
Highlight OFF in step 3 above.