|m |m
IINULIll_ II. _ It_aPUU U
Press MUTE to temporarily turn off the sound. While the sound is
off, the screen will display the word "112 MUTE" or "MUTE" in the
lower right corner. Every time you press the button, the mute mode
will change in the following order.
[-->Normal --> 1/2 MUTE -->MUTE --]
When you select "MUTE" mode, the closed caption feature is
automatically activated. To deactivate this feature, press MUTE again.
This feature works only when the dosed caption mode is set to OFE
See "Using the closed caption feature" on page 45 for more
information.
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to listen to
high-fidelity stereo sound while watching TV, MTS can also transmit
a second audio program (SAP) containing a second language, music,
or other audio information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, the word STEREO
or SAP appears on-screen every time the TV is turned on, the channel
is changed, or the RECALL button is pressed.
The MTS feature is not available when the TV is in VIDEO mode.
To listen to stereo sound:
1. Press MENU, and then press • or • until the AUDIO menu
appears.
2. Press • or • to highlight MTS.
3. Press • or • to highlight STEREO.
@®@8@@
_ AUDIO
TREBLE 50
BALANCE 0
RESET )'
You can leave your TV in STEREO mode because it will
automatically output the type of sound being broadcast (stereo or
monaural). The word "STEREO" or "SAP" displays in yellow in
the menu when the TV receives the signal.
If the stereo sound is noisy, select MONO to reduce the noise.
To listen to SAP (if available):
1. Press MENU, and then press • or • until the AUDIO menu
appears.
2. Press • or • to highlight MTS.
3. Press • or • to highlight SAP. You will hear the station's second
audio program (if available) from the speakers, while viewing the
original program's picture (see note at right).
43HX71 TV front panel
MENU AT<_"
53HX71
,oL % ©
MENU AT<I_
Note :
A secondaudio program (SAP) can be heard
onlyon those TVstations that offerit.
Forexample, a station might broadcastmusic
as a second audio program, ffyou have SAP
on,you willsee the currentprogram on the
screen but hear music insteadof the
program's normal audio.
However,if you have SAP on,and thestation
you are watching isnot currently
broadcastinga secondaudioprogram, you
willsee the picture but not hear anysound ff
this happens,put the TVin STEREOmode so
you canhear the station's normal audio.
47
To Next Page
Loading...
Need help?
General
