playerconnectedtotheColorStream(componentvideo)inputson
theTV,smootherandmorenaturalmotioncanbeobtainedbysetting
theCINEMAMODEtoFILM(auto).
Toselectthecinemamode:
1.PressMENU,andthenpress• or• untilthePICFUREmenuappears.
2. Press• or• tohighlightCINEMAMODE.
3. Press• or• toselectFILM(auto)orVIDEO(off).
®@®®@®
PICTURE ANTENNA
MODE PREFERENCE
FLESH TONE ON
COLOR
TEMPERATURE MEDIUM
CONVERGENCE
SAVE NEW PREFERENCE
To set the CINEMA MODE to VIDEO (off):
Press • or • to select VIDEO in step 3 above.
Selecting the color temperature
You can change the quality of tile picture by selecting from three
preset color temperatures: cool, medium, and warm.
To select the color temperature:
1. Press MENU, and then press • or • until the PICTURE menu
appears.
2. Press • or • to highlight COLOR TEMPERATURE.
3. Press • or • to highlight the mode you prefer.
®®®®@®
O PICTURE ANTENNA CO0_ blueish
MODE PREFERENCE
medium neutral
FLESH TONE ON
AUTO
DNR warm reddish
Resetting picture adjustments
The RESET function adjusts the picture qualities to the following
factory settings:
Contrast ................ max (100) Color temperature ........... cool
Brightness ............ center (50) DNR ............................. auto
Color ................... center (50) Mode ........................... sports
Tint ....................... center (0)
Sharpness ............. center (50)
To reset the picture adjustments:
1. PressMENU, and then press • or • until the PICTURE menu appears.
2. Press • or • to highlight RESET.
3. Press • or •. The menu displays "DONE".
®®®®®®
O PICTURE ANTENNA
MODE SPORTS
CONTRAST 100
BRIGHTNESS 50
COLOR 50
43