End-user Reference Guide
Toshiba DP5000-Series Digital Telephones
18 of 20
End-user Reference Guide
Programming changes can be done through the telephone or through MyPhoneManager. Following are
the instructions using the telephone.
Volume Control
The following instructions apply to all telephones, except DP5008.
³ To adjust the handset volume
³ Press the Vol V to increase volume and Vol W to decrease volume during the call. When you hang
up, the volume returns to the default setting.
³ To adjust the speaker volume for internal/external calls and background music
1. Press Spkr.
2. Press an extension button - you hear dial tone.
3. Press the Vol V
to increase volume and Vol W to decrease volume. This volume setting applies to all
calls until changed.
³ To adjust Ring Tone, Hands free Answerback and Speaker Off-hook Call Announce
³ Make sure the telephone is idle and the handset is on-hook. Press the Vol V to increase volume and
Vol W to decrease volume. This adjusts volume for your telephone’s ring tone, Hands free
Answerback and Speaker Off-hook Call Announce simultaneously.
³ To adjust handset Beep Tone
1. With the handset off-hook, dial the Beep Tone Adjustment Code #6101 (default code). You hear busy
tone.
2. Press Vol V or W to reach the desired level.
Volume Control for DP5008 Telephone
³ Press the Vol V to increase volume and Vol W to decrease volume during it.
³ To adjust the handset volume
³ Press the Vol V to increase volume and Vol W to decrease volume during the call. When you hang
up, the volume returns to the default setting.
³ To adjust the speaker volume for internal/external calls and background music
1. Press Spkr.
2. Press an extension button - you hear dial tone.
3. Press the Vol V
to increase volume and Vol W to decrease volume. This volume setting applies to all
calls until changed.
³ To adjust Ring Tone
³ Make sure the telephone is idle and the handset is on-hook. Press the Vol V to increase volume and
Vol W to decrease volume.
To Next Page
Loading...
Need help?
General