2 Installing Client Software
18 Installing Network Fax Software
Installing Network Fax Software
This chapter includes procedures for installing software required to enable the fax printing and
online address books for this equipment. It is recommended that you read these instructions in
their entirety before beginning the installation process.
Overview
Before you can begin utilizing the network fax feature for this equipment, you must install the
software using the Client Utilities CD-ROM provided. You will use the InstallShield client soft-
ware setup process. This section describes several ways to add N/W-Fax driver to user’s work-
stations. Prior to installing the N/W-Fax driver and Address Book Viewer, the administrator must
install specific hardware and configure the fax options. Only authorized users can modify the
device.
System Requirements
The N/W-Fax driver and Address Book Viewer are available for following environments:
y Display Resolution
1024 x 768 dots or more
y Display Color
High Color (16bit) or higher is recommended
y CPU
Pentium 133 MHz minimum (Pentium 266 MHz or faster recommended)
y Memory
64MB for Windows 98
96MB for Windows Me and Windows NT 4.0
128MB for Windows 2000/XP/Server 2003/Vista
y OS
Windows 98 (Windows 98 Second Edition Recommended)
Windows Me
Windows NT 4.0 Service Pack 6a
Windows 2000 Service Pack 4
Windows XP Service Pack 1/Service Pack2
Windows Server 2003
Windows Vista
Before Installing Client Software
Before installing the client software, confirm the following to perform an appropriate installation.
— When N/W-Fax Driver and Address Book Viewer Has Been Installed
If the N/W-Fax Driver and Address Book Viewer has been installed from either the e-
STUDIO451c Series Client Utilities CD-ROM, e-STUDIO850 Series Client Utilities CD-ROM, e-
STUDIO4511 Series Client2 CD-ROM, e-STUDIO450 Series Client2 CD-ROM, or e-
STUDIO280 Series Client2 CD-ROM, you do not have to install it again.
If you want to install N/W-Fax Driver and Address Book Viewer from this CD-ROM, uninstall the
existing N/W-Fax Driver and Address Book Viewer then reinstall it using this Client Utilities CD-
ROM. When you uninstall the Address Book Viewer, please click [No] at the dialog box that dis-
plays the message to delete the settings for the Address Book Viewer so that you can restore
the settings after installing the new Viewer.
Installing the N/W-Fax Driver and Address Book Viewer
You can install the N/W-Fax driver and Address Book Viewer from the Client Utilities CD-ROM or
TopAccess.
To Next Page
Loading...
Need help?
General
