Toshiba TCR Series User Manual

INTERFACE MANUAL
8.2 TR48DIOC
The output specifications of the TR48DIOC differ from those of the SR7000 (i.e.,
source type). The polarity is the same as the output polarity of I/O printed board
X8HI of this controller.
For the input specifications, a bidirectional photocoupler is used in the input circuit,
and it is possible to change over the source type or sink type by the selection of
INCOM*.
8.2.1 Connecting Extension Input Signal Cable
To connect the extension input signal cable, use the connector attached to the
TR48DIOC module [XM2A–3701 (plug type connector), XM2S–3711 (connector
cover)]. Connect the inputs of the TR48DIOC (DI_101 ~ 128 (station 0) and
DI_133 ~ 160 (station 1) to connector INPUT provided on the module surface.
STE 71367
– 102 –

Toshiba TCR Series Specifications

General

Brand	Toshiba
Model	TCR Series
Category	Controller
Language	English