25
Deodorizing fi lter
(Approximately once a month)
(SW2034, SW2033R only)
1
Unplug the power plug.
2
Remove the deodorizing fi lter.
Hold the knob and pull outward.
Do not pull with undue force.
(May cause damage or malfunctions)
Deodorizing fi lter
Knob
3
Clean with a tool such as a
toothbrush.
When washing with water, dry off all water
before mounting.
Toothbrush, etc.
4
Mount the deodorizing fi lter.
Push fi rmly until a click sound is heard.
5
Insert the power plug.
The POWER LED lights up.
Main Unit
(Approximately daily)
Soft cloth soaked in water
•
Toilet paper
•
Dry cloth
•
Nylon scrubbing pads
(May cause damage.)
1
Unplug the power plug.
2
Wipe with a soft cloth that has
been soaked in water and
wrung-out thoroughly.
■
For heavy dirt
Wipe with a soft cloth soaked in diluted,
neutral kitchen detergent, and then wipe
with a soft cloth soaked in water.
•
Neutral kitchen detergent
•
Paint thinner
•
Benzene
•
Powdered cleanser
3
Insert the power plug.
The POWER LED lights up.
Attention!
●
The Washlet is an electric appliance.
Be careful not to let water seep inside or
leave detergent in the gap between the main
unit and toilet bowl.
(May damage plastic parts or cause a malfunction.)
●
When using a toilet cleaner to clean the
toilet, wash it off within 3 minutes and leave
the toilet seat and toilet lid open.
Wipe off any cleaner that remains on the toilet
bowl. (If vapor from a toilet bowl cleaner enters
the main unit, it may cause a malfunction.)
●
Do not push or pull the covers around the
wand with undue force.
(May cause damage or malfunction.)
●
Wipe the back surface of the toilet seat and
the toilet seat cushions with a soft cloth
tightly wrung out with water.
(Otherwise adhesion of dirt may result in discoloration.)
Maintenance
To Next Page
Loading...
Need help?
General
