Toyota TNS 200 User Manual

RAV4 (LHD) - 1805-01
RAV4 (A2) TNS 200
WIRE HARNESS INSTALLATION
1. Route the wire harness and GPS
antenna along the midconsole area
to the ECU location.
3
2
Fig. 13
Fig. 14
3
2
10P
12P
ll
WIRE SPLICING CONNECTOR
INSTRUCTIONS
3.
a) Remove appropriate amount of tape
wrapping the vehicle side harness to
be connected.
b) Insert the vehicle harness to be
connected securely into the guide slit.
c) After inserting the vehicle side harness
into the guide slit, fix the splicing con-
nector , and lock it securely using a
plier until the connector clicks.
27
21
7
Fig. 15
27
21
7
2. The connectors shown in the illustra-
tion are the vehicle side connectors to
be spliced.
18P

Toyota TNS 200 Specifications

General

Brand	Toyota
Model	TNS 200
Category	Car Navigation system
Language	English