TP-Link AP200 User Manual

15
Chapter 4
4. 1. Quick Setup
Quick Setup wizard allows you to quickly configure your AP device step by step. Choose
the suitable operation mode according to your network environment and follow the
step-by-step instructions.
1. Visit http://tplinkap.net, and log in with the username and password you set for the
AP device.
2. Go to Quick Setup on the top of the page, and follow the on-screen instrustions to
configure your AP device.
Note:
You can also change the operation mode by click the Mode button on the top of the page, and then you will be
guided to the steps of Quick Setup.
4. 2. WPS
WPS (Wi-Fi Protected Setup) feature can help you to quickly and securely connect to
a network. WPS functions differently in different operation modes. In Access Point and
Multi-SSID modes, the WPS feature can be used only when the network security is set
to None or WPA2-PSK/AES. In Repeater/Bridge and Client modes, this device can use
WPS (Push button method) to connect to Host network while local wireless networks
do not support the WPS feature.
This section will guide you to add a new wireless device to an existing network quickly
by the WPS feature. There are two ways to use this feature: by push button method and
by PIN (Personal Identification Number). The PIN method can only be applied in Access
Point and Multi-SSID modes.
Push Button Method
Follow the steps below to use WPS by push button method.
1. Press the WPS button on the real panel of the AP device. The WPS LED will blink slowly,
which shows the function has been triggered and the device is trying to connect or
to be conected. This process may take up to 2 minutes.

TP-Link AP200 Specifications

General

2.4 GHz	Yes
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u
Receiver sensitivity	2.4GHz: 11g 54M: -76dBm@10% PER 11n HT20 MCS7: -73.5dBm@10% PER 11n HT40 MCS7: -71dBm@10% PER 5GHz: 11a 6Mbps:-93dBm@10% PER 11a 54Mbps: -75dBm@10% PER 11ac HT20 MCS8: -67dBm@10% PER 11ac HT40 MCS9: -62.5dBm@10% PER 11ac HT80 MCS9: -59.5dBm@10% PER
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	750 Mbit/s
Maximum data transfer rate (5 GHz)	433 Mbit/s
Maximum data transfer rate (2.4 GHz)	300 Mbit/s
Output current	1 A
Output voltage	12 V
Antenna type	External
Antenna features	Detachable antenna
Antennas quantity	2
Internal	No
Placement	Table
Certification	CE, FCC, RoHS
Product color	Black
Cables included	LAN (RJ-45)
Security algorithms	64-bit WEP, 128-bit WEP, WPA-PSK, WPA2-PSK, WPS
Compatible operating systems	Microsoft Windows 98SE, NT, 2000, XP, Vista, Windows 7, 8, 8.1, 10, Mac OS, NetWare, UNIX, Linux
Operating altitude	5 - 90 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions

Depth	162 mm
Width	242 mm
Height	44 mm