TP-Link Archer AX20 User Manual

52
Chapter 10
Network Security
10. 1. Protect the Network from Cyber Attacks
The SPI (Stateful Packet Inspection) Firewall protects the router from cyber attacks
and validate the traffic that is passing through the router based on the protocol. This
function is enabled by default.
1. Visit
http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced > Security > Firewall. It’s recommended to keep the default settings.
10. 2. Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
I want to:
Block or allow specific client devices to access my network (via wired or wireless).
How can I do that?
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced > Security > Access Control.
3. Toggle on to enable
Access Control.
4. Select the access mode to either block (recommended) or allow the device(s) in the
list.
• To block specific device(s):
1 ) Select
Blacklist.

TP-Link Archer AX20 Specifications

General

Color	black
Wi-Fi Speed	1.8 gigabits per second
Wi-Fi Mesh System	no
Band Technology	dual
Frequency Band	2.4 ghz, 5.0 ghz
Beamforming	yes
QoS Traffic Prioritization	yes
Ethernet Standard	10/100/1000
Wireless Networking Standard	wi-fi 6
Wireless Standard	ax, ac, n
2.4 Ghz Streams	1
5.0 Ghz Streams	1
Antennas	4
Parental Control	yes
Firewall	nat
Data Encryption	yes
Encryption Type	wpa, wpa2, wpa3
Ports	rj-45
LAN Ports	4
WAN Ports	1
Input/Output	mu-mimo (multi-user multiple-input multiple output)
Built In Modem	no
Bluetooth	no
Smart Applications	true, tether
System Requirements	microsoft windows 98se/nt/2000/xp/vista™/7/8/8.1/10, mac os, netware, unix or linux
Smart Functions	amazon alexa

Weight and Dimensions

Height	5.3 inches
Width	1.5 inches
Net Weight	0.97 pounds