TP-Link Archer AX20 User Manual

84
Chapter 13
Customize Your Network Settings
Note:
PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported
devices can connect to your router with the PIN. The default PIN is printed on the label of the router.
13. 8. 3. Push the WPS Button
Click Start on the screen or directly press the router’s WPS button. Within two minutes,
enable WPS on your personal device.
Success will appear on the screen and the WPS
LED of the router should change from flashing to solid on, indicating successful WPS
connection.
13. 9. Advanced Wireless Settings
Check advanced wireless settings for your device.
1. Visit
http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced > Wireless > Additional Settings.
3. Configure advanced wireless settings.

TP-Link Archer AX20 Specifications

General

Color	black
Wi-Fi Speed	1.8 gigabits per second
Wi-Fi Mesh System	no
Band Technology	dual
Frequency Band	2.4 ghz, 5.0 ghz
Beamforming	yes
QoS Traffic Prioritization	yes
Ethernet Standard	10/100/1000
Wireless Networking Standard	wi-fi 6
Wireless Standard	ax, ac, n
2.4 Ghz Streams	1
5.0 Ghz Streams	1
Antennas	4
Parental Control	yes
Firewall	nat
Data Encryption	yes
Encryption Type	wpa, wpa2, wpa3
Ports	rj-45
LAN Ports	4
WAN Ports	1
Input/Output	mu-mimo (multi-user multiple-input multiple output)
Built In Modem	no
Bluetooth	no
Smart Applications	true, tether
System Requirements	microsoft windows 98se/nt/2000/xp/vista™/7/8/8.1/10, mac os, netware, unix or linux
Smart Functions	amazon alexa

Weight and Dimensions

Height	5.3 inches
Width	1.5 inches
Net Weight	0.97 pounds