TP-Link MC110CS User Manual

1.2 Conventions
The Converter mentioned in this guide stands for Fast Ethernet
Media Converters or the WDM Fast Ethernet Media Converters
without any explanations.
The TP port mentioned in this User Manual stands for the TX port
without any explanations.
Note:
The four converters are sharing this User Guide. Their differences
are in the table in Section 1.4.
1.3 Features
 Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
 Provides one SC fiber connector and one RJ-45 connector.
 Supports auto negotiation of duplex mode on TP port.
 Supports auto negotiation of 10/100Mbps and auto MDI/MDI-X for
TP port.
 Supports Link Fault Pass Through function and Far End Fault
function.
 Extends fiber distance up to 2km for multi-mode fiber and 20km
for single-mode fiber.
 Easy-to-view LED indicators provide status to monitor network
activity easily.
 External power supply.
1.4 Connectors and Network Cables Supported
The connectors and network cables supported by the converter are
listed as follows.
3

TP-Link MC110CS Specifications

General

I/O ports	1x 100M SC 1x 100M RJ45
Full duplex	Yes
Dimensions (WxDxH)	94.5 x 73 x 27 mm
Fiber optic connector	SC
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	1
Cabling technology	UTP 3, 4, 5e, 5
Networking standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Cable types supported	Cat3, Cat4, Cat5, Cat5e
Ethernet interface type	Gigabit Ethernet
Maximum data transfer rate	1000 Mbit/s
Fiber ethernet cabling technology	100BASE-FX
Internal	No
Certification	FCC, CE
Product color	Black
LED indicators	Power, Speed
Wavelength	1310 nm
Maximum transfer distance	20000 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Power consumption (max)	1.52 W
Package depth	204 mm
Package width	165 mm
Package height	65 mm
Package weight	380 g

Weight and Dimensions

Depth	73 mm
Width	94.5 mm
Height	27 mm