TP-Link Omada EAP115 User Manual

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
We, TP-Link USA Corporation, has determined that the equipment shown as above has been
shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized
change is made in the equipment and the equipment is properly maintained and operated.
Issue Date:2020-5-12
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.
OPERATING FREQUENCY (the maximum transmitted power)
For EAP110 / EAP115:
2412MHz—2472MHz(20dBm)
For EAP225 / EAP245 / EAP265 HD:
2412MHz—2472MHz(20dBm)
5180MHz—5240MHz(23dBm)
For EAP235 / EAP610 /EAP620 HD / EAP650 / EAP660 HD / EAP670:
2412MHz—2472MHz(20dBm)
5180MHz—5240MHz(23dBm)
5260MHz—5320MHz(23dBm)
5500MHz—5700MHz(30dBm)

TP-Link Omada EAP115 Specifications

General

5 GHz	No
2.4 GHz	Yes
Frequency band	2.4 - 2.4835 GHz
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Receiver sensitivity	300M: -71dBm@10% PER 150M: -75dBm@10% PER 54M: -78dBm@10% PER 11M: -93dBm@8% PER 6M: -92dBm@10% PER 1M: -96dBm@8% PER
Virtual LAN features	VLAN mapping
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Transmitting power (CE)	19 dBm
Transmitting power (FCC)	21 dBm
Maximum data transfer rate	300 Mbit/s
WAN connection	Ethernet (RJ-45), Wi-Fi
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Placement	Ceiling, Wall
Certification	CE, FCC, RoHS
Product color	White
Cable lock slot type	Kensington
Output current	1 A
Output voltage	12 V
Power consumption (typical)	5 W
Power over Ethernet (PoE) type supported	Passive PoE
Antenna type	Internal
Antenna features	Integrated antenna
Antennas quantity	2
Antenna direction type	Omni-directional
Antenna gain level (max)	3 dBi
Number of products included	1 pc(s)
Security algorithms	64-bit WEP, 128-bit WEP, 152-bit WEP, HTTPS, SNMP, SSH, WPA, WPA-PSK, WPA2-Enterprise, WPA2-PSK
Number of SSID supported	8
Service Set Identifier (SSID) features	Multiple SSIDs
Minimum system requirements	Microsoft Windows 10/8/7/Vista/XP
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Package depth	268 mm
Package width	246 mm
Package height	69 mm
Package weight	600 g
Harmonized System (HS) code	85176990
Sustainability certificates	Federal Communications Commission (FCC), CE, RoHS

Weight and Dimensions

Depth	180 mm
Height	47.5 mm