EasyManuals Logo
Home>TP-Link>Controller>Omada OC200

TP-Link Omada OC200 User Manual

TP-Link Omada OC200
117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
32
Channel Select the channel used by the EAP. For example, 1/2412MHz means that
the channel is 1 and the frequency is 2412MHz.
By default, the channel is automatically selected, and we recommend that
you keep the default setting.
Tx Power (EIRP) Specify the transmit power value.
If this value is set to be larger than the maximum transmit power that is
allowed by the local regulation, the regulated maximum transmit power will
be applied in the actual situation.
Note:
In most cases, it is unnecessary to use the maximum transmit power.
Specifying a larger transmit power than needed may cause interference to
the neighborhood. Also it consumes more power and reduces longevity of
the device.
Load Balance
With the Load Balance feature, you can limit the maximum number of clients who can
access the EAP. In this way, you can achieve rational use of network resources.
Follow the steps below to configure Load Balance:
1. Click to choose a frequency band on which the load balance feature will
take effect.
2. Check the box to enable Load Balance.
3. Specify the maximum number of clients who can connect to the EAP at the same time.
While the number of connected clients has reached the limit and there are more clients
requesting to access the network, the EAP will disconnect those with weaker signals.
4. Click Save.
Airtime Fairness
Note:
Airtime Fairness is only available on certain devices. To check whether your device supports this
feature, refer to the actual web interface.

Table of Contents

Other manuals for TP-Link Omada OC200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link Omada OC200 and is the answer not in the manual?

TP-Link Omada OC200 Specifications

General IconGeneral
Networking standardsIEEE 802.3af, IEEE 802.3at
Ethernet LAN data rates10, 100 Mbit/s
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Input current1 A
DC input voltage5 V
Power over Ethernet (PoE)Yes
Power consumption (typical)5 W
Flash memory4000 MB
Internal memory1024 MB
Processor frequency1000 MHz
Control display unitNo
Internal memory typeDDR3
Management platformL3
Security algorithmsSSID, WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
CertificationCE, FCC, RoHS
Product colorBlack
Cables includedLAN (RJ-45)
Compatible operating systemsWindows10, 8, 7, Vista, XP; MAC OS; NetWare, UNIX; Linux
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Package depth128 mm
Package width135 mm
Package height70 mm
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth98 mm
Width99.8 mm
Height25 mm

Related product manuals