EasyManuals Logo
Home>TP-Link>Controller>Omada OC200

TP-Link Omada OC200 User Manual

TP-Link Omada OC200
117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
82
Follow the steps below to configure Management Access on this page:
1. Check the box to enable MAC Authentication.
2. Specify one or more MAC addresses in the MAC1/MAC2/MAC3/MAC4 fields. Up to
four MAC addresses can be added.
3. Click Save.
Tips:
You can click to quickly add the MAC address of your current logged-in host, .
Verify the MAC addresses carefully. Once the settings are saved, only the hosts in the MAC
address list can access the web page of the EAP.
If you cannot log in to the web page after saving the wrong configuration, you can reset the EAP
to the factory defaults and use the default username and password (both admin) to log in.
Configure Management VLAN
Management VLAN provides a safer method to manage the EAP. With Management VLAN
enabled, only the hosts in the Management VLAN can access the web page of the EAP.
Since most hosts cannot process VLAN TAGs, you can connect the management host to
the network via a switch, and set up correct VLAN settings for the switches on the network
to ensure the communication between the host and the EAP in the Management VLAN.
Follow the steps below to configure Management VLAN on this page:
1. Check the box to enable Management VLAN.
2. Specify the VLAN ID of the management VLAN. Only the hosts in the Management
VLAN can log in to the EAP via the Ethernet port.
3. Click Save.

Table of Contents

Other manuals for TP-Link Omada OC200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link Omada OC200 and is the answer not in the manual?

TP-Link Omada OC200 Specifications

General IconGeneral
Networking standardsIEEE 802.3af, IEEE 802.3at
Ethernet LAN data rates10, 100 Mbit/s
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Input current1 A
DC input voltage5 V
Power over Ethernet (PoE)Yes
Power consumption (typical)5 W
Flash memory4000 MB
Internal memory1024 MB
Processor frequency1000 MHz
Control display unitNo
Internal memory typeDDR3
Management platformL3
Security algorithmsSSID, WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
CertificationCE, FCC, RoHS
Product colorBlack
Cables includedLAN (RJ-45)
Compatible operating systemsWindows10, 8, 7, Vista, XP; MAC OS; NetWare, UNIX; Linux
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Package depth128 mm
Package width135 mm
Package height70 mm
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth98 mm
Width99.8 mm
Height25 mm

Related product manuals