4 SSP-PRC001-EN
Condensing Units Options
The 7½ and 10-ton single
compressor models feature single
refrigeration circuitry, lowering job
installation costs by requiring only
one set of refrigerant lines. These
units are ideal for low cost, new
construction, building renovation
and unit replacement jobs.
In addition, Odyssey includes 15 and
20-ton dual compressor units to give
true stand-by protection; if one
compressor fails, the second will
automatically start-up. Also, the first
compressor can be serviced without
shutting down the unit since the
refrigerant circuits are independent.
Dual compressors also provide high
energy savings. Most buildings are
designed for peak load requirements
even though the building typically
operates at less than peak load.
During light load conditions only one
compressor functions to maintain
the space comfort, reducing energy
use. For instance, the EER of the 15
ton unit at ARI conditions is 10.1 and
at part load conditions it is 11.6.
Trane split systems have been
specified in thousands of
applications. You’ll find Odyssey will
win you even more jobs with its
compact, manageable cabinet which
will save time and money for rigging
and installation and permit Trane to
replace almost any unit —
effortlessly.
Each heat pump unit can operate to
50°F as standard in the cooling
mode. An accessory Head Pressure
Control gives you the capability to
operate to 0°F. All heat pumps offer
these accessories:
• Head Pressure Control
• Coil Guard Kits
• Isolators - both Rubber-in-Shear
and Spring Type
• Anti-Short-Cycle Kit
• Time Delay Relay
Air Handlers Offer More
Flexibility
Flexibility is a key to meeting
changing market requirements.
Odyssey split systems offer not only
heat pumps, but also convertible air
handlers.
The air handlers can be installed
either vertically in a mechanical
room or horizontally above a ceiling
— and it doesn’t require any removal
of panels to make either airflow
application work.
Figure 2.
These air handlers have a double
sloped condensate drain pan that
allows for either airflow
configuration. The drain pan can
easily be removed for cleaning.
All the air handlers feature factory-
installed belt drive and ball bearing
evaporator fans with adjustable
sheaves for maximum airflow
performance. In fact, the standard
motor on the 10-ton air handler will
deliver 4000 cfm at 1.4" ESP. Plus
oversized motors are available for
higher static applications.
Features and Benefits
To Next Page
Loading...
Need help?
General
