page 16 XL 850 User Guide
In existing Z-Wave networks already congured
with a Z-Wave bridge, the XL 850 Control will
automatically congure itself as a Z-Wave
repeater. See the section titled Including/
Excluding Z-Wave Devices for additional
information on using the XL 850 Control as a
Z-Wave bridge.
When the XL 850 Control is functioning as a
Z-Wave repeater, the Z-Wave Repeater Screen
allows you to exclude the XL 850 Control from
the network and to unregister the device from
your account.
Exclude from a Network
Press this button to remove the Z-Wave repeater
from your Z-Wave network. This button is used
in conjunction with the exclude button on the
standalone Z-Wave bridge
1. From the HOME>MENU Screen on the XL
850 Control, touch NEXIA.
2. Press EXCLUDE FROM NETWORK to
remove Z-Wave repeater.
3. Press the EXCLUDE on the standalone
Z-Wave network bridge to complete
exclusion.
Unregister
Press UNREGISTER to unregister this XL 850
Control from your account. This will disconnect
the XL 850 from your account and remove the
repeater from your Z-Wave network.
1. From the HOME>MENU Screen on the XL
850 Control, touch NEXIA.
2. Press UNREGISTER to remove from your
Nexia account.
Z-Wave Repeater Screen
Nexia Z-Wave Repeater
Included as node 8 on network EE729FD4
Home Back
Z
WAVE
To Next Page
Loading...
Need help?
General
