Trane CVHG Installation Instructions

Pre-Installation
12 AFDH-SVN03H-EN
Electrical Cable Size
Specifications for AFDH Drives
Table 2. Input/output power wire cable sizes AFDH D-Frame drives (460 V/480 V)
65K Short Circuit Withstand Rating
Catalog/Maximum
(a)
Amps
281 Catalog/
301 Maximum
336 Catalog/
361 Maximum
413 Catalog/
443 Maximum
500 Catalog/
535 Maximum
Incoming power to drive circuit breaker:
Number of cables per phase and
range of wire sizes lugs will accept std lug
Two Wire Lugs
3/0–250 KCMIL
Two Wire Lugs
400–500 KCMIL
Three Wire Lugs
3/0–400 KCMIL
Four Wire Lugs
4/0–500 KCMIL
Incoming power to drive circuit breaker:
Number of cables per phase and range of wire
sizes lugs will accept Opt Lug
Two Wire Lug
2/0–250 KCMIL
One Wire Lug
2/0–500 KCMIL
N/A
Two Wire Lugs
500–750 KCMIL
Three Wire Lugs
500–750 KCMIL
Output power to compressor motor:
Number of wire cable per phase and
size of factory installed wires (unit mount)
Two
4/0 Wires
Three
4/0 Wires
Three
DLO 313
Three
4/0 Wires
Output power to compressor Motor: Number
of Cables per phase and range of wire sizes
lugs will accept (remote mount)
Two Wire lugs
2–600 KCMIL
Two Wire Lugs
2–600 KCMIL
Two Wire Lugs
2–600 KCMIL
Two Wire Lugs
2–600 KCMIL
100K Short Circuit Withstand Rating
Catalog/Maximum
(a)
Amps
281 Catalog/
301 Maximum
336 Catalog/
361 Maximum
413 Catalog/
443 Maximum
500 Catalog/
535 Maximum
Incoming power to drive circuit breaker:
Number of cables per phase and
range of wire sizes lugs will accept Std Lug
Two Wire Lugs
3/0–250 KCMIL
Two Wire Lugs
400–500 KCMIL
Four Wire Lugs
4/0–500 KCMIL
Four Wire Lugs
4/0–500 KCMIL
Incoming power to drive circuit breaker:
Number of cables per phase and range of wire
sizes lugs will accept Opt Lug
Two Wire Lugs
2/0–250 KCMIL
One Wire Lug
2/0–500 KCMIL
N/A
Three Wire Lugs
500–750 KCMIL
Three Wire Lugs
4/0–500 KCMIL
Output power to compressor motor:
Number of wire cable per phase and
size of factory installed wires (unit mount)
Two
4/0 Wires
Three
4/0 Wires
Three
DLO 313
Three
4/0 Wires
Output power to compressor motor:
Number of cables per phase and range of wire
sizes lugs will accept (remote mount)
Two Wire Lugs
2–600 KCMIL
Two Wire Lugs
2–600 KCMIL
Two Wire Lugs
2–600 KCMIL
Two Wire Lugs
2–600 KCMIL
(a)Catalog amps reflect nominal selection sizes, maximum amps reflect AFD maximum capacity. Applications beyond catalog amps are
allowed per discussions with product support team.
Table 3. Input/output power wire cable sizes AFDH D-Frame drives (380 V/400 V)
65K Short Circuit Withstand Rating
Catalog/Maximum
(a)
Amps
293 Catalog/
315 Maximum
367 Catalog/
395 Maximum
446 Catalog/
480 Maximum
545 Catalog/
588 Maximum
Incoming power to drive circuit breaker:
Number of cables per phase and
range of wire sizes lugs will accept Std Lug
Two Wire Lugs
3/0–250 KCMIL
Two Wire Lugs
400–500 KCMIL
Three Wire Lugs
3/0–400 KCMIL
Four Wire Lugs
4/0–500 KCMIL
Incoming power to drive circuit breaker:
Number of cables per phase and
range of wire sizes lugs will accept Opt Lug
Two Wire Lug
2/0–250 KCMIL
One Wire Lug
2/0–500 KCMIL
N/A
Two Wire Lugs
500–750 KCMIL
Three Wire Lugs
500–750 KCMIL
Output power to compressor motor:
Number of wire cable per phase and
size of factory installed wires (unit mount)
Two
4/0 Wires
Three
4/0 Wires
Three
4/0 Wires
Three
4/0 Wires
Output power to compressor motor:
Number of cables per phase and range of wire
sizes lugs will accept (remote mount)
Two Wire Lugs
2–600 KCMIL
Two Wire Lugs
2–600 KCMIL
Two Wire Lugs
2–600 KCMIL
Two Wire Lugs
2–600 KCMIL

Trane CVHG Specifications

General

Brand	Trane
Model	CVHG
Category	Chiller
Language	English