AFDH Drive Package Specifications
22 AFDH-SVN03H-EN
Control Box Components for CH531/Tracer AdaptiView Version AFDH
Other AFDH Drive Package Accessories
Motor panel transition covers
• It is possible to order a complete new motor panel
transition cover assembly if one is needed, either as
part of the drive package order or separately if
necessary.
• The transition cover assembly when properly
installed,
prevents direct access to the output motor
lead sections that emerge from the access cutout at the
back of a unit-mounted or stand-mounted AFDH drive,
and connect to the compressor motor terminal board.
Figure 12. D-Frame AFDH CH531/Tracer AdaptiView
control box components
1. Dual analog I/O board (2A11)
2. Dual low voltage binary input board (2A10)
3. Starter module (2A1)
4. Start relay (2K1) 120 Vac
5. Relay socket (for relay 2K1 or 2K2)
6. Run relay (2K2) 24 Vdc
7. Relay (2K12) 120 Vac
8. Relay socket for 2K12
9. Power supply (2A3)
10. Terminal blocks; 30 amp
11. Terminal blocks; 65 amp
12. Fuse holder (for fuse 2F22)
13. Fuse (2F22) 2 amp
Figure 13. Buss bars specifications; CH531/Tracer
AdaptiView hardware packages
1. Example of shorting buss bars contained in kit BAR0177
2. Example of shorting buss bars contained in kit BAR0163
3. Example of shorting buss bars contained in kit BAR00176
4. Example of shorting buss bars contained in kit BAR00165
Table 11. Part numbers for motor panel transition covers
Part Description Trane Part # Mnemonic #
6-inch motor panel transition cover
assembly
506820000100 COV02946
12-inch motor panel transition cover
assembly
506859440100 COV03203
18-inch motor panel transition cover
assembly
506819750100 COV02945
To Next Page
Loading...
Need help?
General
