Maintenance and Adjustment
100
Operation Description
Odometer Reading in Miles (Km) or Time Period, whichever comes first
First Service
Annual
Service
Mileage Based Service
Every
600 (1000)
6 Months
Ye ar
10,000 and
30,000 (16,000
and 48,000)
20,000
(32,000)
40,000
(64,000)
Brakes
Brake pads - check wear levels Day • • • • •
Brake master cylinders - check for fluid leaks - • • • • •
Brake calipers - check for fluid leaks and seized
pistons
- • • • • •
Brake fluid levels - check Day • • • • •
Brake fluid - renew Every 2 years regardless of mileage
Drive Chain
Drive chain slack - check/adjust Day • • • • •
Drive chain - wear check Every 500 miles (800 km)
Drive chain - lubricate Every 200 miles (300 km)
Drive chain rubbing strip - check - • • • • •
Electrical
All lights, instruments and electrical systems
- check
Day • • • • •
General
Instruments and engine ECM - check for
latest calibration download using the Triumph
diagnostic tool
- • • • • •
Fasteners - inspect visually for security Day • • • • •
Bank angle indicators - inspect visually for wear Day • • • • •
Side stand/Centre stand - lubricate/check
operation
Day • • • • •
Side stand pivot pin - clean/grease - • • •
Carry out all outstanding Service Bulletin and
warranty work
- • • • • •
Carry out road test - • • • • •
Complete the service record book and reset the
service indicator (if fitted)
- • • • • •
* Evaporative system fitted to models for certain markets only.