Maintenance and Adjustment
133
Rear Suspension Compression
Damping Adjustment - Thruxton RS
Only
The compression damping adjuster
is located at the top of the rear
suspension unit.
1
1. Rear suspension compression damping
adjuster
To adjust the compression damping
setting:
• Rotate the adjuster clockwise
to increase, or anticlockwise to
decrease.
• Always count the number of
adjuster clicks anticlockwise from
the fully clockwise position.
Bank Angle Indicators
Warning
Use of a motorcycle with bank angle
indicators worn beyond the maximum
limit will allow the motorcycle to be
banked to an unsafe angle.
Banking to an unsafe angle may cause
instability, loss of motorcycle control
and an accident.
Bank angle indicators are located on the
rider’s footrests.
Regularly check the bank angle
indicators for wear.
Bank angle indicators must be replaced
when they have reached the maximum
wear limit of 5 mm in length.
1
1. Bank angle indicator
To Next Page
Loading...
Need help?
General
