Maintenance and Adjustment
123
Street Scrambler
cjyu
1
2
1. Upper level line
2. Lower level line
To inspect the rear brake fluid level:
• Remove the right hand side panel as
described for the Street Scrambler
on page 68.
• The brake fluid level in the rear
reservoir must be kept between the
upper and lower level lines.
To adjust the rear brake fluid level:
• Release the reservoir from the
frame without detaching the
connecting hose.
• Remove the reservoir cap noting the
position of the sealing diaphragm.
• Fill the reservoir to the upper level
line using new DOT 4 brake fluid
from a sealed container.
• Refit the reservoir cap making sure
that the diaphragm seal is correctly
positioned between the reservoir
cap and the reservoir body.
• Refit the reservoir to the frame by
tightening the original fixing to
5 Nm.
• Refit the right hand side panel.
Brake Light Switches
Warning
Riding the motorcycle with defective
brake lights is illegal and dangerous.
An accident causing injury to the rider
and other road users may result from
use of a motorcycle with defective
brake lights.
The brake light is activated
independently by either the front or
rear brake. If, with the ignition in the ON
position, the brake light does not work
when the front brake lever is pulled
or the rear brake pedal is pressed,
have your authorised Triumph dealer
investigate and rectify the fault.
To Next Page
Loading...
Need help?
General
