12
TOOLS NEEDED FOR
ASSEMBLY
INCLUDED
IN BOX
5mm Allen Wrench YES
17mm Wrench YES
8mm T-Handle Allen
Wrench
YES
#2 Phillips Screwdriver NO
7/16” Wrench NO
Adjustable Wench NO
Level NO
Long-Length Ruler
0”-48”/0 cm-120 cm
NO
ASSEMBLY INSTRUCTIONS
PRE-ASSEMBLY CHECKLIST
BASIC GUIDELINES FOR SETTING UP THE EQUIPMENT
After removing the equipment from the packaging, place the equipment on a clean, level surface. Make sure the electrical
cord easily reaches a grounded three-pronged outlet.
!
DANGER: Do not use an extension cord or ungrounded outlet. The ground helps prevent electrical damage to
your equipment and enhances your safety by helping to prevent shock. Check with a qualifi ed electrician or serviceman if
you are in doubt as to whether the equipment is properly grounded. Do not modify the plug provided with the unit if it will
not fi t the outlet. Have a proper outlet installed by a qualifi ed electrician.
Use caution when assembling the treadmill.
Unpacking and assembling of this treadmill is a two person task.
VERIFY BOX CONTENTS
IMPORTANT! Please verify box contents. If you have questions, or if there are any missing parts, contact product
support (service@truefi tness.com // 800.883.8783).
!
CAUTION:
NOTE: Supplemental video available on vimeo.com: https://vimeo.com/820698826.
To Next Page
Loading...
Need help?
General
