31
1. Using a level or estimating by sight, adjust both leveling feet until they contact the fl oor.
IMPORTANT! Do not adjust the leveling feet to such a height that they detach or unscrew from the machine.
2. Verify both wing nuts on the leveling feet are securely tightened (wing nuts should be fl ush against the bottom of the
frame).
!
CAUTION:
Prevent potential damage to the machine and injury to the user. This unit is equipped with adjustable rear leveling feet.
Make sure that the running surface is level at all times. If the treadmill is placed on a uneven surface, adjusting the rear
feet can help, but may not completely compensate for extremely uneven surfaces. Treadmills that are not level can cause
misalignment of the belt, uneven belt wear, and possible injuries for the user.
wing nut
leveling feet
wing nut
LEVELING THE TREADMILL
NOTE: You should be able to
loosen and tighten the wing
nuts by hand. If not, use an
adjustable wrench.
To Next Page
Loading...
Need help?
General
