34
PREVENTATIVE MAINTENANCE
TRUE recommends that quarterly scheduled maintenance be performed by a qualifi ed service technician. Please contact
your dealer or visit www.truefi tness.com to contact a local TRUE authorized service technician.
IMPORTANT! Use only TRUE Fitness certifi ed service providers.
Frequency Tasks
Daily • Check for worn, frayed or missing safety lanyards. Replace missing or worn safety lanyards
immediately. Look and listen for slipping belts, loose fasteners, unusual noises, worn or frayed power
cords, and any other indications that the equipment may be in need of service.
• Use GymWipes™ Antibacterial wipes or spray a solution of 30 parts water to 1 part mild detergent to
dampen a soft cloth and wipe all exposed surfaces.
• Use a LCD/screen cleaner or spray a solution of 1 part 91% isopropyl alcohol and 1 part water to
dampen a soft cloth and wipe the surface of the console. This helps remove fi ngerprints, dust, and
dirt.
Weekly • Vacuum any dust or dirt that might have accumulated under or around the treadmill. Clogged air
vents can prevent adequate cooling to the drive motor, incline motor, and motor control board
causing a shortened life.
• Check for proper belt tension.
Quarterly • Record time, distance, and hours from the console.
• Check error log in console.
• Check belt tension.
• Check belt alignment.
• Move treadmill and vacuum underneath.
• Inspect fasteners.
• Inspect components for abnormal or premature wear.
LONG TERM STORAGE
When the treadmill is not in use for any length of time, turn it off . Make sure that the power cord is unplugged from the
power source and is positioned so that it will not become damaged or interfere with people or other equipment.
STORING THE CHEST STRAP
Store the chest strap in a place where it remains free of dust and dirt such as, in a closet or drawer. Be sure to protect the
chest strap from extremes in temperature. Do not store it in a place that may be exposed to temperatures below 32° F (0°
C). To clean the chest strap, use a sponge or soft cloth dampened in mild soap and water. Dry the surface thoroughly with
a clean towel.
To Next Page
Loading...
Need help?
General
