TSC MH240 Series User Manual

26
3.6 Loading Media in Rewinder Mode (Option)
1. Open the media cover
and load the meida.
2. Install the label as indicated and set
printer mode to Rewinder Mode.
3. Install the paper core
onto the rewind spindle.
4. Feed the leading edge of liner through
the peel-off module slot as indicated.
5. Spin the rewind spindle
conterwise to make the
media be fixed.
6. Adjust the media rewind guide to fit the
label width.
Close print head and the lower cover.

TSC MH240 Series Specifications

General

Brand	TSC
Model	MH240 Series
Category	Barcode Reader
Language	English