TSC PEX-1121 Series User Manual

- 17 -
4. Thread ribbon above the ribbon guide bar and through ribbon sensor slot. (Please refer to
“Loading path for ribbon” as following fig.)
Left-hand model
Right –hand model
5. Wind the ribbon rewind spindle counterclockwise roughly 3~5 circles until ribbon is smooth,
properly stretched and wrinkle-free.
Left-hand model
Right –hand model
6. Close the print head mechanism by pushing the print head release lever.
Left-hand model
Right –hand model
Note:
Please refer to video on TSC YouTube.

TSC PEX-1121 Series Specifications

General

Brand	TSC
Model	PEX-1121 Series
Category	Printer
Language	English