TSC PEX-1121 Series User Manual

- 19 -
3.3 Loading the Media
3.3.1 Loading the Media
1. Open the print engine cover.
Note: There is no media supply spindle for standard model.
Left-hand model
Right –hand model
2. Push open the print head release lever and label guide bar release lever for loading media.
Left-hand model
Right –hand model
3. Pull the leading edge of the label forward through the media guide bar pass media sensor, and
place the leading edge onto the platen roller.
Left-hand model
Right –hand model

TSC PEX-1121 Series Specifications

General

Brand	TSC
Model	PEX-1121 Series
Category	Printer
Language	English