TYT TH-9000D User Manual

53
DC power cabcle
Alarm cable
Steering-wheel etc.
Battery
Alarm cable
P
3
P
4
P
5
P
1
P
2
DATA
PWR
TX
Long-distance Anti-theft Alarm
This function is mainly use for simple anti-theft alarm device in vehicles. When the
transceiver be removed in an improper manner,the transceiver will emit and transmit alarming
and background voice to system and other transceiver of the same frequency.
Connect DC power cable with car battery.
1. Connect the optional alarm cable to the data jack on the front panel as shown. Secure
the other end of the cable to an object that stays fixed in vehicle.(Note: if alarm cable is not
enough long, you can choose optional alarm cable to extend).
2. When transceiver power off by press key ,the long-distance anti-theft alarm enable.
3. Note:The long-distance anti-theft alarm only available when transceiver power off .
52
BEEP--OF :turn off voice prompt
BEEP--ON :turn on voice prompt
3. Press number key to exit and store.
LCD Backlight
1. In standby status,press , then press LCD displays"LAMP- XX" .
2. Press [ / ] to select desired backlight brightness(1-32 levels).
3. Press number keys to confirm and exit.
UP DOWN

TYT TH-9000D Specifications

General

Brand	TYT
Model	TH-9000D
Category	Two-Way Radio
Language	English