ZED-F9P-Integration manual
1 Integration manual structure
This document provides a wealth of information to enable a successful design with the ZED-F9P
module. The manual is structured according to system, software and hardware aspects.
The first section, "System description" outlines the basics of enabling RTK operation with the ZED-
F9P. This is essential reading for anyone new to the device to enable them to understand a working
RTK implementation.
The following section "Receiver functionality" provides an exhaustive description of the receiver's
functionality. Beginning with the new configuration messages, both existing and new users should
read this section to understand the new message types employed. Most of the following sub-
sections should be familiar to existing users of u-blox positioning products, however some changes
are introduced owing to the new configuration messages.
The sections from "Design" onwards address hardware options when designing the ZED-F9P
into a new product. This part gives power supply recommendations and provides guidance for
circuit design and PCB lay-out assistance. The "Antenna" section provides design information
and recommendation for this important component. A final "Design guidance" section helps the
designer to check that crucial aspects of the design-in process have been carried out.
The final section addresses the general product handling concerns giving guidance on ESD
precautions, production soldering considerations and module delivery tape and reel information.
UBX-18010802 - R08
1 Integration
manual structure
Page 6 of 110
Early production information
To Next Page
Loading...
Need help?
General
