Fig. no. 11
H (High): Indicates that your wake-up tem-
perature is unusually high (e.g. fever).
Fig. no. 12
10th cycle day, no “babies” mean infertile
phase.
Fig. no. 13
E (Error): Repeat the measurement if this
letter is displayed.
Fig. no. 14
“Baby”: Alternately ashing “babies” mean
“fertile phase”.
Fig. no. 15
“Babies”: Two “babies” simultaneously mean
“highly fertile phase”.
Fig. no. 16
°C: Indicates the measured wake-up tem-
perature accurately in degress Celsius to 2
decimal places.
Fig. no. 17
”Battery”: These displays appear during the measurement or when the data are
called up if the battery power is low and the battery has to be replaced by UEBE
Customer Service.
Fig. no. 18
Fig. no. 10
L (Low): Indicates that your wake-up tem-
perature is below your normal average tem-
perature. A ashing “L” during the meas-
urements indicates that the sensor is in its
warm-up phase.
Ovulation symptoms
Temperature rise•
Change in cervical mucus•
Increase in LH concentration in the urine•
What symptoms can be observed or veried in connection with
imminent ovulation?
In this event, no babies are indicated in the cyclotest® 2 plus display.
Fig. no. 9
DAY OLD: When scrolling back, you have
called up the measurement result of the
27th day of your previous cycle. Your current
cycle measurement is not impaired by this.
To Next Page
Loading...
Need help?
General
