UNI-T UT20B User Manual

Measurement Operation (1)
A. AC Voltage Measurement
Warning
To avoid harms to you or damages to the Meter from electric shock, please
do not attempt to measure voltages higher than 300V rms although readings
may be obtained.
The AC voltage measurement positions are: 200V and 300V. To measure AC Voltage,
connect the Meter as follows:
1. Set the rotary switch to an appropriate measurement positions in V
range.
2. Connect the test leads across with the object being measured.
The measured value shows on the display, which is effective value of sine wave
(mean value response).
11
Model UT20B: OPERATING MANUAL

UNI-T UT20B Specifications

General

Diode test	Yes
Product type	Digital multimeter
DC current range	0.2 - 2 A
DC voltage range	0.2 - 300 V
Statistic function	Maximum
Basic accuracy (DC current)	±(2.5%+10)
Basic accuracy (DC voltage)	±(1.5%+2)
Basic accuracy (resistance)	±(2.5%+5)
Dimensions (WxDxH)	52 x 26 x 95 mm
Battery voltage	12 V

Weight and Dimensions

Weight	125 g