UNI-T UT20B User Manual

F. Measuring Resistance
Warning
To avoid damages to the Meter or to the devices under test, disconnect circuit
power and discharge all the high-voltage capacitors before measuring resistance.
The resistance measurement positions are: 200Ω, 2000Ω, 20kΩ, 200kΩ and 2000kΩ.
To measure resistance, connect the Meter as follows:
1. Set the rotary switch to an appropriate measurement position in Ω range.
2. Connect the test leads across with the object being measured.
The measured value shows on the display.
Measurement Operation (9)
19
Model UT20B: OPERATING MANUAL

UNI-T UT20B Specifications

General

Diode test	Yes
Product type	Digital multimeter
DC current range	0.2 - 2 A
DC voltage range	0.2 - 300 V
Statistic function	Maximum
Basic accuracy (DC current)	±(2.5%+10)
Basic accuracy (DC voltage)	±(1.5%+2)
Basic accuracy (resistance)	±(2.5%+5)
Dimensions (WxDxH)	52 x 26 x 95 mm
Battery voltage	12 V

Weight and Dimensions

Weight	125 g