UNI-T UT20B User Manual

Measurement Operation (6)
D. Battery Test
To test the battery proceed as follows:
1. Set the rotary switch to the 1.5V or 9V measurement position in
range.
2. Connect the test leads across with the battery being measured ensuring the
polarity is correct.
The measured value shows on the display, which is the voltage between the
cathode and anode of the battery.
Note
l When battery testing has been completed, disconnect the connection between
the testing leads and the battery under test.
16
Model UT20B: OPERATING MANUAL

UNI-T UT20B Specifications

General

Diode test	Yes
Product type	Digital multimeter
DC current range	0.2 - 2 A
DC voltage range	0.2 - 300 V
Statistic function	Maximum
Basic accuracy (DC current)	±(2.5%+10)
Basic accuracy (DC voltage)	±(1.5%+2)
Basic accuracy (resistance)	±(2.5%+5)
Dimensions (WxDxH)	52 x 26 x 95 mm
Battery voltage	12 V

Weight and Dimensions

Weight	125 g