UNI-T UT50A User Manual

21
Note
l When Hz measurement has been completed,
disconnect the connection between the testing leads
and the circuit under test.
G. The Model UT50B/UT50C: Temperature
Measurement (see figure 9)
Warning
To avoid harm to you or damages to the Meter, do
not attempt to measure voltages higher than 60V in
DC or 30V rms in AC although readings may be
obtained.
The temperature measurement range is from -40
o
C~
1000
o
C or -40
o
F~1832
o
F. To measure temperature,
connect the Meter as follows:
Note
l The Meter automatically displays the temperature
value inside the Meter when there is no temperature
probe connection.
Measurement Operation(9)
1. Insert the red temperature into the VΩ terminal
and the black temperature probe into the COM terminal.
2. Set the rotary switch to
o
C or
o
F.
3. Place the temperature probe to the object being
measured.
The measured value shows on the display.
( figure 9)
Model UT50A/B/C: OPERATING MANUAL

UNI-T UT50A Specifications

General

Brand	UNI-T
Model	UT50A
Category	Multimeter
Language	English