UNI-T UT804 User Manual

20
Model UT804: OPERATING MANUAL
Display features are shown in Figure 2-2 and described
in Table 2-4.
Figure 2-2. Display Features
Selecting the Range
Press RANGE to enter manual ranging mode and select
a fixed range.
Autoranging (AUTO lighted in the display) always comes
on initially when you select a new function. In autorange,
the Meter selects the lowest input range possible,
ensuring that the reading appears with the highest
available resolution.
If AUTO is already on, press RANGE to enter MANUAL
ranging in the present range. You can then select the
next manual range each time you press RANGE.
Return to autoranging by press EXIT.
Press RANGE when turning on the Meter, the Meter
enters the analogue resistance signal measurement
mode.
Understanding the Display

UNI-T UT804 Specifications

General

Brand	UNI-T
Model	UT804
Category	Multimeter
Language	English