UNI-T UTG2122B User Manual

UTG2000B Series 71
You can set with multi-functional knob and direction key directly on this interface. You can also press
corresponding soft keys of function again, when the interface below will pop up. To set some parameter,
press corresponding soft key, input the required value and select the unit.
Figure 3 - 2 Set modulation rate
(4) Use channel output
Press CH1 button start channel 1 output quickly. Or enable output by pressing Utility and then CH1
Setting . After channel output is opened, backlight of CH1 button is on, and on the right side of channel
information label, the font “OFF” changes to “OSK”, meaning open channel output.

UNI-T UTG2122B Specifications

General

Brand	UNI-T
Model	UTG2122B
Category	Portable Generator
Language	English