UTG2000B Series 19
2.5 Set utility
You can set channel information, sync output, merge channel, set up channel coupling, frequency meter,
network, system, language, clock, load, save setting, arbitrary wave management, software upgrade,
help, system information in Utility.
2.5.1 Set channel
Menu Sub menu Setting Note
CH1 setting/ CH2
setting
Channel output ON/OFF
Channel reverse ON/OFF
Sync output CH1/CH2/OFF
Load 50Ω, high
resistance
1Ω to 1kΩ
Channel merge ON/OFF When this function is ON, channel 1
merges with channel 2.
Channel duplicate Channel can be duplicated each other in
settings status.
Amplitude limit ON/OFF
Amplitude upper
limit
Set the upper limit of amplitude output
Amplitude lower
limit
Set the lower limit of amplitude output
Select Utility CH1 setting (or CH2 setting), to set the channel :
Note: Since there are numerous items under CH1 setting, there are 2 pages in this menu. You need to
press CH1 setting again to skip to next page. CH2 setting is the same.