Unify OpenScape DECT Phone S5 Base User Manual

78
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Getting started
Gigaset S850 / ALL UK en / A31008-XXXXX-XXXX-X-XX / starting.fm / 12/2/14
Connecting the charging cradle (if included)
¤ Connect the flat plug of the power
adapter .
¤ Plug the power adapter into the power
socket .
To remove the plug from the charging cradle
again:
¤ Disconnect the power adapter from the
mains power supply.
¤ Press the release button .
¤ Pull out the plug .
Setting up the handset for use
The display is protected by a plastic film. Please remove the protective film!
Inserting the batteries
2
1
3
4
1
2
3
4
Only use rechargeable batteries, as this could otherwise result in significant health
risks and personal injury. For example, the outer casing of the batteries could be
destroyed or the batteries could explode. The device could also malfunction or be
damaged as a result of using batteries that are not of the recommended type.
¤ Insert the batteries (for
correct +/- direction, see
diagram).
¤ Fit the battery cover from
the top.
¤ Press the cover until it clicks
into place.
To re-open the battery cover:
¤ Insert a fingernail behind
the notch at the top of the
cover and slide it
downwards.

Unify OpenScape DECT Phone S5 Base Specifications

General

Brand	Unify
Model	OpenScape DECT Phone S5 Base
Category	Cordless Telephone
Language	English