14 Getting to know the OpenStage
Programmable function keys
Your OpenStage 15 T has eight illuminated keys to which you can assign functions or numbers.
Depending on how they are programmed, you can use the keys as follows:
• Function keys Page 49
• Repdial/Direct station selection keys
Page 53
Each key can be programmed with one function.
Press the key briefly to activate the programmed function or dial the stored number.
Hold the key to open the key programming menu Page 49.
Your OpenStage is delivered with label strips. Write functions or names in the white fields on the
label strips.
The status of a function is shown by the LED display for the corresponding function key.
Meaning of LED displays on function keys and DSS keys
Increase the number of programmable function keys by connecting a key module
Page 12.
The configuration of direct station selection keys must be activated by your service person-
nel.
Direct station selection keys can be assigned an internal number from the HiPath 4000 net-
work.
LED Meaning of function key Meaning of DSS key
S Off The function is deactivated. The line is free.
T Flashing
1
1 In this manual, flashing keys are identified by this icon, regardless of the flashing interval. The flashing interval repre-
sents different statuses, which are described in detail in the corresponding sections of the manual.
Indicates the function status. The line is busy.
R On The function is activated. There is a call on the line.
The programmable keys on multi-line phones function as trunk keys Page 72.
To Next Page
Loading...
Need help?
General