70 More functions/services
Controlling relays (only for HiPath 3000)
If this function has been configured (consult your service personnel), you can
use up to four relays to enable/disable different devices (such
as a door opener).
Depending on how you program the relays, you can activate and deactivate
them manually or configure them to activate and deactivate automatically (after
timeout).
Select and confirm the option shown.
or
Select and confirm the option shown.
1 ... 4 Enter the relay.
Sensors (HiPath 33x0/35x0 only)
If configured (consult your service personnel), sensors are able to recognise sig-
nals, call your phone and display an appropriate message on the screen.
Paging persons (not for U.S.)
If radio paging equipment (PSE) is connected to your system (consult your ser-
vice personnel), you can locate people via their pocket receivers.
Pocket receivers signal a call request to the person you want to page. This per-
son can then answer the page at the nearest phone.
Paging persons
To ensure that you can be found, you must have enabled a ringing group
Page 80, call forwarding Page 24 or call forwarding-no answer (service en-
gineer) to the internal station number of your PSE.
A call request is signalled automatically.
Answering the page from the nearest telephone
^ Lift the handset.
)59 Enter the code.
j Enter own station number.
To Next Page
Loading...
Need help?
General