UBio-X Pro2 User Guide 43
UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,
Seoul, Korea (zip code: 05836)
Tel: +82-2-6488-3000, Fax: +82-2-6488-3099,
E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr
▶[Name]: If you input the user name by clicking
[Name] button, the registered user list including
the characters is shown.
If you click [BACK] button in this window, you
can move to the ‘3.3. User management’ menu.
Ex) If you search ‘m’, all the users including ‘m’
are searched as the left picture.
3.4. Network setting
If you select [Network] in the main menu, the following window appears.
▶Basic setting: Same with the window at the left side.
Select the method [Static IP] if the static IP is
allocated from the connected network, and select
[DHCP] if the IP is allocated from the DHCP server in
the connected network.
.
If you selected [Static IP], set the IP address,
subnet mask, and gateway. And if you selected
[DHCP], you don’t have to set them.
DNS entry is possible instead of IP in the [Server
IP], and if you use specific DNS server, input the IP
address of [DNS] server together. Check “DDNS”
when typing DNS in order to type in English.
▶[Port]: The basic port value of the authentication server (Alpeta) is ‘9003’, and if you
change the value, you should change the server program with the same value, so be
cautious.
To Next Page
Loading...
Need help?
General
