Union Community UBio-X Pro2 User Manual

UBio-X Pro2 User Guide 65
UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,
Seoul, Korea (zip code: 05836)
Tel: +82-2-6488-3000, Fax: +82-2-6488-3099,
E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr
▶Wiegand Output
It is used only when the special controller is equipped running by the Wiegand input.
When the authentication is finished, the data of the following format is sent to the
Wiegand port of the terminal.
None
General case. It does not use Wiegand out port.
26bit
Because it sends “Site code [1byte] + User ID [2 bytes]”, set the user
ID less or equal than 4 digits.
Send example) In case of SiteCode:045(2Dh), UID:6543(198Fh)
 1 00101101 0001 1001 10001111 0
34bit
Because it sends “Site code [1 byte] + User ID [3 bytes]”, set the user
ID less or equal than 7 digits.
But, if the user ID is 8 digits, ignore site code and send only the “User
ID [4byte]”.
Send example) SiteCode:001(1h), UID:123456(1E240h)
 0 00000001 00000001 11100010 01000000 0
Custom
It is set by the user definition, which only can be set in the server, and
the setting type only can be inquired in the terminal.
Click [OK] button to apply the set value, and click [BACK] button to cancel and return.
3.7.6. ETC.(Thermal)
From the main menu, select [Terminal]  [ETC.(Thermal)] to display the screen
below.
▶thermal Camera Use
When checking ( ) this option, you can use the
thermal camera.
- Camera Type1: When you equip the thermal camera
as the bracket type, select this option.
- Camera Type2: When you equip the thermal camera
in the steel box, select this option to install in the
speed gate and etc.
- Module Type1: When you equip the thermal module
as the bracket type, select this option.

Union Community UBio-X Pro2 Specifications

General

Brand	Union Community
Model	UBio-X Pro2
Category	Intercom System
Language	English